Boom.

So.. I have to say goodbye to WordPress.

It’s been fun, lovely.. whatever.

I’m going back to Blogger. It’s easier to use and on the old blog I had a bigger follower base.

Come catch me over at Wrapped in Glitter!!

Long time no see!

Well howdy! (uhh ya, I’m definitely not from Texas) A lot of things have happened since the last time I blogged and I’m so ready to jump back in full steam! We no longer live in FL and are back in our home city. The hubs was honorably discharged from the Air Force after 4 and a half interesting years and we’re currently loving civilian life!

We also moved into a house (YAY!) where we have more bedrooms than we know what to do with (helllooooo craft room!).

Image

I started a new job out here working nights and love it! I’ve also transferred to a school out here to continue my education.

Well, get ready for a TON of posts because I have A LOT of making up to do!

Tag Blankie Tutorial

It seems like EVERYONE is drinking (or drank) ‘the water‘ and is pregnant or just had a baby. (That is why I’ll stick with coffee and Dr. Pepper!) So if you haven’t noticed most of my crafts/tutorials are baby related and that is the main reason. That and they’re fun and easy to make!

I followed this AWESOME tutorial over at Design, Dining + Diapers. Go check her out here. I altered mine just a little with the size since I wanted a little bit bigger one.

image-8

______________________________________________________________________________________

image

What You’ll Need:

*Depending on the size of blanket you want to make. The tutorial I followed did it with a 12″x12″ square. Mine came out to 17″x25″

1 yd of fabric for top (minky) – On sale at Joann’s for 50% off, came out to $6/yd + 15% off coupon

1 yd of fabric for bottom (flannel) – On sale at Joann’s for 60%, off came out to $2.67/yd + 15% off coupon

1 Spool of ribbon – $1.97 at WalMart

Matching thread – $2.16 at WalMart

_______________________________________________________________________________________

Lay out your fabric and cut the size of blanket you want. Like I said above, the tutorial I followed did a 12×12 square which seemed perfect, but I just had extra fabric so I made mine a little bigger.

Cut your ribbon into 5″ strips

image-1

_______________________________________________________________________________________

Lay out your minky fabric with right side up. Fold the ribbon in half with wrong sides together and pin evenly around the blanket with the ribbon loop inward. I pinned mine every 3″. image-2

image-3

_______________________________________________________________________________________

Now put your flannel on top with the right side facing down so right sides are together and one by one take the pin from the ribbon and re-pin through all three layers.

image-4

_______________________________________________________________________________________

Sew all the way around leaving about a 4″ opening and flip the blanket right side out..

(You’ll probably have to take a ribbon out that you pinned to do this.. don’t worry, you’ll put it back later)

image-5

_______________________________________________________________________________________

Now fold in and pin the fabric of that hole with the ribbon you took out back in place and sew it closed. I also sewed around the blanket again for a more finished look..

image-6

image-7

DIY Craft Organizer Board

I think I pinned this awhile ago on Pinterest and finally decided I needed to get somewhat organized. This was super simple and fairly cheap to make (under $35).

image-2

________________________________________________________________________________________

What you’ll need:

One 4′ x 2′ pegboard – $6.09 at Lowe’s

Three 2″ x 2′ pieces of wood (see picture below) –  $3.48 for all 3 at Lowe’s

Pack of 6 x 1/2 flat Philips wood screws (see picture below) – $1.06

Four 2″ screws (already had it)

Drill bit (already had it)

Drill (had it)

Philips screwdriver (had it)

Optional:

32 piece hook assortment – $3.87 at Home Depot

Multi-Screwdriver Holder – $2.97 at WalMart (to hold scissors)

I picked up a shallow three tray organizer at Walmart for about $3

I wanted something to organize my spools so I picked up the 60 Spool Organizer at Micheal’s half off for $7.50

________________________________________________________________________________________

I started with pegboard, took the 2″ x 2′ wood pieces, the wood screws and a Philips screw driver and attached the pieces of wood to the back of the pegboard like this..

image-7

image-8

These are the screws I used..

image-6

_____________________________________________________________________________________

If you want to paint it, now would be the time.

Then take your drill and drill bit and make the holes in each of the four corners (through the pegboard and wood piece attached).

Then (if you have help) have someone hold the board to the wall where you want it and with the 2″ screws drill through the pre-made holes and attach to the wall..

image-9

_______________________________________________________________________________________

This is where I just organized it how I liked. The three tray desk organizer I got at Walmart I hot glued to two pegboard hooks so it would stay up.

picstitch

_______________________________________________________________________________________

I also saw a picture of people using toe separators for pedicures to hold bobbins.. BRILLIANT. (A pack of two is $.97 at Walmart)

image-3

HAPPY CRAFTING!!

New Sewing Machine!

So it’s been a little longer than I’d like since I last posted, but things have been crazy. The hubs had knee surgery (minor and he’s doing great!) and I’ve been sewing on my new Janome sewing machine!! I went to Joann’s for 3 things and walked out with a new machine and a cart full of stuff. FAIL. I do have to say that everything (besides the machine) was at least 40% off plus an additional 15% off from a coupon that I received through email. SCORE!

Let me just say this Janome 7330 is such an upgrade from my cheapy Brother I bought 7 years ago while I was in High School (I think at Walmart?). It has so many features and I’m just amazed with how different it feels to sew between the two machines. (I have to say I HATE the flowers on the machine. I feel like I got one of those toy machines they sell at Toys-R-Us!)

The first thing I noticed was that the pedal from the Janome is metal and the Brother was plastic. The second was how heavy the new machine was. I was really surprised by this.

image

All in all, I LOVE my new machine and it was definitely worth the money!

DIY Hooded Baby Swaddler

image6

I found this on Pinterest (duh). It was originally made a car seat swaddler, but it was for a friend so I just made it a regular one. You can find the original tutorial and fab blog here.

____________________________________________________________________________________

What you’ll need: (I got everything at walmart and spent less than $15)

1 yd of fabric for outside – usually patterned (the original tutorial says flannel – I wish I would have gotten something really fuzzy and soft)

1 yd of fabric for inside – usually solid color (same as above)

1 yd of batting

____________________________________________________________________________________

Lay your fabric out with right sides together and fold it twice so it’ll be a quarter of what it was before.

image

___________________________________________________________________________________

Take a pen or fabric marker and freehand a design like this. You can tell the raw edges are the ones that will be cut off.

image1

__________________________________________________________________________________

Then cut along the line you made.

image2

____________________________________________________________________________________

Lay your two pieces of fabric (with right sides still facing each other) out on your batting and pin down.

image3

image4

___________________________________________________________________________________

Cut around the fabric so you now have two layers of fabric and a layer of batting all pinned together.

image5

____________________________________________________________________________________

Sewing around the perimeter with the batting on the bottom leaving one big round corner open and turn the blankie right side out.

image3

___________________________________________________________________________________

Now lay out the blankie flat and fold the open corner with right sides facing together. I didn’t get a picture so I drew on this one of where you’d fold it (on the grey line).

image9

___________________________________________________________________________________

Now that it’s right side out and folded with right sides facing each other you’ll draw a line (yellow line below) and sewing along basically cutting off the rounded corner and making a hood.

image90

After you’ve sewn along that yellow line cut off the excess and I did a zigzag stitch (unless you have a nifty serger) to make the edges in the hood look better and not so sharp.

____________________________________________________________________________________

I sewed around the blankie to give it a more finished look.

image8

___________________________________________________________________________________

And wallah!

image7

Like I said, if I were to do this again I would definitely gone with a nice really plush fabric, at least for the inside. Overall it was a super simple craft and it took me less than an hour.

DIY Harry Potter Apron

So I’m sure many people have seen the AWESOME HP apron on Pinterest made by Bakingdom which you can find here.

Again I saw this and since I’m a HUGE HP nerd said, “I’m sure I can make that!” (plus she posted a semi photo tutorial)

______________________________________________________________________________________

What You’ll Need:

– 2 yards grey fabric (you could probably get away with 1, but I get 2 of everything just in case – $2.99/yd @ Joann’s)

– 1 yard of black fabric ($2.99/yd @ Joann’s)

– 1/4 of a yard red and gold (or whatever HP colors you desire) glittery Tulle/Mesh type fabric

– Thin red and gold (or whatever colors you are doing) ribbon

– 3 packs of 2.75m Bias Tape

– HP patch ordered from here ($6.95 from Universal Studios web store)

_____________________________________________________________________________________

If you already have an apron around your house this step is super simple, just lay down your fabric then your apron on top and trace away. Since I didn’t have an apron already I kept my fabric folded (like it comes from the store) and hand drew an outline. Now cut along the line you’ve drawn/traced.

 Sorry it’s so light and my picture quality is so crappy. These are iPhone pics – I can’t find my charger for my DSLR anywhere! (and my point and shoot got stolen at the Harry Potter theme park – go figure) Hopefully I’ll get a new camera for Christmas!!🙂

ETA: This was the original outline I drew, I ended up cutting off quite a bit from the bottom to make it a bit more round and not so ‘boatish’.

image1

_____________________________________________________________________________________

Now I laid down my cut out grey portion (still folded) onto my folded black fabric and traced the curve and then free-handed the bottom (which later on was cut to make it curve more). Here I wish I would have made it longer to ruffle the black bottom part when attached to the grey.

image2

____________________________________________________________________________________

Now this feels a little ‘odd’ because in your mind it’s not going to fit. Put right sides together (so your seem will be facing backwards – your curves will be opposite) and start with the ‘point’ on one side of the black and sew it all the way around so the other ‘point’ is attached to the grey.

(You can see below how different the shape of the bottom is compared to what I free-handed up top and where I rounded the grey instead of having a corner.)

image3

_________________________________________________________________________________

Now on some left over grey draw/trace two pockets.

image4

______________________________________________________________________________

You can either glue or sew the ribbon horizontally across the top. Then pin and sew your bias tape around the pocket as a border.

image5

This is where I wasn’t thinking (or I was just rushing) and didn’t sew close to the inside edge of the bias tape. It will look better, but be careful you’re getting the front layer and back layer of the tape while sewing.

If you don’t sew on the inside edge it will end up like this when you sew it onto your apron..

image8

___________________________________________________________________________________

Now pin your pockets to your apron and sew around the edges leaving the top open to make the actual pocket (obviously).

image6

image9

____________________________________________________________________________________

After your pockets are attached pin the bias tape around the whole apron and sew it down. Remember what I said about sewing close to the inside edge.

image12

_________________________________________________________________________________

Here I had extra grey left over so I made the neck ‘string’ thick by taking two 3 or 4″ strips of fabric folded right sides together and sewing one end and the long raw edge. Flip it right side out and pin and sew the raw (non sewn) end to the top corners of your apron.

image13

__________________________________________________________________________________

I didn’t want to make thick strings to go around the waist so I used left over bias tape and sewed the opening together with a zigzag stitch and attached them to where the apron falls on my waist.

image14

____________________________________________________________________________________

Take your tulle/mesh and cut little rectangle pieces (maybe 2″x3″ – doesn’t need to be perfect) of both colors.

Then I kind of ‘accordianed’ one end…

image16

laid it onto the bottom, back side of the apron..

image17

and pinned it down alternating the colors..

image15

After it was all pinned down I just sewed a line as close to the inner edge of the bias tape that I could get.

___________________________________________________________________________________

Now I had to wait 6 days for my patch to come in, once it did I ironed it on to the upper left corner of the apron. I know most people also sew it, but I don’t think it’s going anywhere. If it does then I’ll sew it back on.

image19

___________________________________________________________________________________

Now you have your finished product!

ETA: You can see here I made some bows and glued them on. If you want to sew them, make sure you either do it by hand so your pocket will still be functional, or do it before you sew the pocket onto the apron!

image18

image20

image21

DIY Ornament Wreath

 So this was definitely one of the quicker DIY things lately and best of all?! It was FREEEE!!

photo 3

 

What you’ll need:

– Metal hanger

– Cheap/plastic or left over ornaments (I have no idea the count maybe 50 or so, just to be safe)

– Ribbon or fabric for bow (I obviously used the left over fabric from the DIY tree skirt from the previous post)

– Hot glue gun

Glue the top (where the hook would go) to the ball of the ornament to make sure it doesn’t fall off.

 

photo 2

Undo the top of the screw part of the hanger so it isn’t connected. Form the hanger into a round shape and start stringing all the ornaments on packing them as closely together as possible.

Once you get to the top, screw the two pieces back together. I left the hook at the top so it would be easier to hang.

I then looped some burlap to cover the upper portion of the hanger and put on some bows to make it pretty.

UPDATE: This was leaning against something so I could take it into work (which I forgot that day) and Bentley (our Dane) got into this too.😦

photo9

DIY Ruffle Burlap Tree Skirt

image-8

So this was my inspiration (pinsperation since I found it – like everything else – on Pinterest). You can see her fabulous design and tutorial (that I used) here !

19773685833594321_DJ7EJga6_c

What you’ll need:
– 2 yards of burlap [$2.99 on sale at Joann’s – Walmart usually has it too]

– 2 yards of red (or any color) fabric (I got 4 because I found some fab fabric on sale at Joann’s) [$3.99]

– Hot glue gun [I have a cheapy $8 one]

– TONS of glue stick (I only have 3 left over from a bag I picked up) [I think this cost more than my glue gun haha]

– Cheap or old treeskirt for base (I’ve read that some people used old table cloths as well) [FREE!]

– Wine (just kidding.. kind of)

NOTE: This is a VERY(!!!) time consuming project! I did it over three evenings.

First start by cutting 3″ strips of each of your fabric. Have fun with that burlap! (lol)

Lay out your tree skirt and get ready!

image1

(Isn’t that red fabric awesome?! SO Christmassy!)

I started at the bottom of the tree skirt, layed down about 1 1/2″ of glue and put the fabric on it and held for a couple seconds. I’d then fold over a little bit backwards and put a dot of glue (fabric to fabric) to hold the ‘ruffle’. You can see the glue got HOT so I used my pin box to do the job for me.

image-2

Keep doing that all the way around the skirt. Don’t freak when your strip runs out. Just glue the next one to it and keep going. It doesn’t even have to be pretty, you won’t even notice it.

Next row is the burlap. Figure how far apart you want your rows and repeat the above steps. (My burlap ruffles were a bit bigger than the fabric) One thing I noticed with the burlap is it doesn’t stick as easily as the fabric (duh). So I ended up pinning each ruffle down as I went like this..

image-3

Keep going all the way around and again don’t worry when you run out, just glue two pieces together.

image-4

I got up at stretched ever time a row was done. My back was KILLING me by the end of this project. The ruffles get smaller as you work your way up.

image-5

The finished product!!

securedownload

UPDATE: After coming home from work one night this is what I found..

photo-1

BOO!!😦 Our Dane got bored and thought I made him a chew toy. I still haven’t fixed it, but I will.. someday. This isn’t the only thing he ruined either. Double boo.